192.168.1.210 is a private IP address used for local networks. You can log in or set up to the admin page by entering the 192.168.1.210 into your browser’s address bar. If you are willing to set up your new Linksys router then you are at the right spot. This is the In-depth guide where we will be share in a few methods by which you can easily configure your Linksys router without any kind of hassle.
How to Configure Router With 192.168.1.210 IP:
We will be sharing a total of 4 methods so you can use take the help of these methods to configure your Linksys router. Let us know discuss the first method.
Method #1 – Open the configuration menu
Steps by which you can open the configuration menu of your Linksys menu are provided below:-
Step 1- Connect your router to your Laptop/PC through an ethernet cable. You will get this cable with your Linksys router for free. Just connect one side of the cable into the WAN port of the router and then insert the other port into your Laptop/PC.
Step 2- Now, you will have to open any browser. You can use any browser. Just open the browser and type “192.168.1.210” into the search bar and hit enter.
Step 3- Then, a pop-up will ask you for your login credentials. You will have to enter your username and password in the required field and hit enter.
Note:- The username is “admin” in most cases.
Step 4- Once you enter these details, you will have to save the settings. You get an installation disk with your Router. You can use this disk to change the settings.
Also Read: 192.168.1.254 IP Login
Method #2- Set Up the wireless network
In order to set up the wireless network, you can follow the steps which are provided below:-
Step 1- Go to the Wireless tab. You can easily spot the wireless tab in the configuration menu. You will arrive on the “Basic wireless settings” once you tap on the wireless tab option. You can use these basic wireless settings in order to set up your own wireless network or make it secure.
Step 2- Next step is to enter SSID of your wireless network. SSID is basically the name of your wireless network. You will have to enter this name in the SSID field.
Note:- You should never add your personal details in the SSID field because it can be discovered by anyone.
Step 3- Now, it is time to broadcast your SSID. You must check the “Enable” option after the SSID field.
Step 4- After that, save all the settings by clicking on the Save settings option.
Step 5- You are done with the SSID broadcasting now but you still have to secure your network. You can secure your Wireless network by visiting the “Wireless security” tab in the configuration menu.
Once you visit the Wireless security option, set the encryption to WPA2 because it is the latest and safest mode of encryption. Another thing which you can do in order to make your wireless network secure is to set your pre-shared key format as a passphrase and then add a secured password so that people without your access will not be able to access your WIFI network. Once you do all these things, save the settings once again.
Also Read: 192.168.1.1 IP Login
Method #3- Forward the ports
If you are willing to provide unregistered access of some programs to specific ports then follow the steps provided below.
Step 1- Go to the Port Range forwarding section which you can find in the Applications and gaming tab. After that, enter the name of the program or application for which you are willing to forward ports.
Step 2- The next step is to enter values inside the starting and ending point section.
Step 3- Now, you will have to select your Protocol. You can use between TCP or UDP or both of them.
Step 4- After you enter all the information mentioned above, enable the port forwarding. Also, click on the “Save the settings” option.
Method #4- Block Access to the specific website
This is the last method of this guide where you will learn about how you can block the access to some websites so that people connected to your WIFI network will not be able to access those websites.
All the steps are provided below.
Step 1- Go to the Access restrictions tab. You can locate this option in the configuration menu.
Step 2- Enter any name for your access policy in the access policy field.
Step 3- Now, you will have to add the IP address of the devices on which you want to get specific websites blocked. You can add these addresses by clicking on the “Edit list of PCs” Option.
Step 4- After that, you will be able to schedule the blocking feature. By doing this, the selected devices will not be able to access mentioned websites for a specific period of time.
Step 5- Finally, you can now add the websites which you are willing to get blocked from your wireless network so that no one connected to your network will be able to access those specific websites.
Step 6- Once you follow all the above mentioned steps, click on the “Apply changes” option.
Also Read: 192.168.0.1 IP Login
Thank you for reading the complete guide for setting up the Linksys router. We hope that you found this article to be useful for you. If you have any questions then you can put them in the comments tab and we will try to answer to all of them.